X30 Hydraulic Brake Mini Excavator Brush Cutter | Virnig
See more by Virnig
Product overview
Virnig X30 Hydraulic Brake Mini Excavator Brush Cutter
Description
Work brush from the reach and positioning of your mini excavator with the Virnig X30 Hydraulic Brake Brush Cutter. Choose a 42- or 48-inch cutting width and the supplier-supported motor range for your machine.
Three double-sided blades work beneath a deck with a removable front section for 270-degree blade engagement. A serrated rear deck supports back-dragging, and hydraulic braking reduces the wait for the blades to stop. A correct hanger bracket and a protected operator cab are required before operation.
Features
- Direct-drive Eaton motor with relief-valve protection; no case drain is required.
- Hydraulic braking stops blade rotation within 15 seconds to reduce operator wait time.
- Rounded flywheel carries three double-sided blades.
- Bolt-on hanger interface allows compatible hanger brackets to be changed.
- Bolt-on front deck can be removed for 270-degree blade engagement.
- Serrated rear deck supports back-dragging brush and grubbing stumps.
- Standard motor and spindle guards protect drive components.
Choosing Your Attachment
A shatterproof excavator cab is required. Hanger bracket is not included. Cutter operating weight is the selected cutter plus the actual compatible hanger and every selected option. The excavator lowest over-side lift capacity at maximum reach, in every applicable blade and boom orientation, must exceed that operating weight. Machine mass alone does not establish safe compatibility. Arrange a separately priced compatible hanger before use if you do not already have one. Maximum hydraulic pressure is 3,500 PSI. The 42-inch model is offered at 15-25 or 22-28 GPM; the 48-inch model at 15-22 or 22-28 GPM. Listed excavator mass ranges are 8,900-26,000 pounds for 42 inches and 11,000-26,000 pounds for 48 inches, subject to actual lift capacity.
What's Included?
- X30 cutter with 90-inch, 3/4-inch hoses, couplers, motor guard and spindle guard.
- Hanger bracket is not included. Optional curtains and factory-installed carbide teeth only when selected.
- One curtain fits the left side; two curtains enclose both sides. Replacement tooth kits are separate from installed teeth.
Product Resources
Virnig provides manuals by serial number. Use the manual lookup to find the correct instructions for your attachment.