V60 Open Front Rotary Brush Cutter | Virnig

Virnig V60 Open Front Rotary Brush Cutter

Description

Clear brush and woody growth with a cutter that balances stored cutting energy with recovery speed. The Virnig V60 Open Front Rotary Brush Cutter uses three double-sided blades and a reinforced deck around a three-quarter-inch flywheel.

Compared with the heavier V70 flywheel, the V60's lighter rotating assembly offers a more responsive cutting feel. Wide deck channels, replaceable runners and protected drive components support repeated clearing work. Optional factory carbide teeth add material processing capability and are distinct from replacement tooth kits.

Features

• Motor and spindle guards and pressure relief help protect hydraulic and drivetrain components.
• The rounded flywheel is designed to glance off obstructions and distribute cutting energy.
• Replaceable front skid shoes support ground-level cutting and travel over uneven ground.
• Three double-sided blades provide up to 39 inches of active sharpened edge.
• A 3/4-inch-thick flywheel stores cutting energy while balancing recovery speed.
• Wide structural deck channels help resist loading while shedding material and simplifying cleaning.
• Replaceable deck runners and tapered rear corners support serviceability and material flow.
• Hydraulic braking is specified to stop the flywheel within 25 seconds; a lift-limit chain is included.
• Optional factory carbide teeth help process material and grind small stumps; replacement tooth kits are a different offer.

Choosing Your Attachment

Do not operate without a shatterproof cab on the loader. Match the universal skid steer quick-attach interface, actual auxiliary flow, operating pressure and loader capacity to the selected motor. Virnig requires loader operating capacity greater than 2,500 pounds, calculated at 50 percent of tipping load, even if the machine publishes a 35-percent rating. Never exceed the selected motor's flow limit or pressure rating (3,500 PSI standard flow; 4,100 PSI high flow; 4,500 PSI high pressure). Reducing engine RPM does not make an oversized hydraulic system compatible. Choose a cutting width that covers the loader's tires or tracks. Follow the operator manual and all operating-area safety requirements. Every motor package requires a case drain. Installed carbide-tooth quantity is matched to the selected width.

Blade Service

Replace cutter blades as a complete matched kit rather than mixing individual replacement blades. Read and follow the operator manual before operation.

What's Included?

• V60 open-front cutter with three blades, couplers, case drain and lift-limit chain.
• Standard- and high-flow packages use 3/4-inch hoses; high-pressure packages use 1-inch hoses.
• Factory carbide teeth only when selected. The optional pressure gauge is separate. No electrical controller is required.

Product Resources

• View This Product on Virnig
• Product Specifications (PDF)
• Find Your Virnig Operator Manual

Virnig provides manuals by serial number. Use the manual lookup to find the correct instructions for your attachment.