Product overview
Virnig V50 Skid Steer Hydraulic Angle Snow Blade
Description
Change your snow-pushing direction without leaving the cab with the Virnig V50 Angle Snow Blade. Its standard hydraulic-angle system turns the blade left or right, helping you work along drives, parking areas and other changing snow-clearing routes.
Side-to-side oscillation lets the blade follow uneven surfaces, while the trip edge helps it respond when it meets an obstruction. The reversible steel cutting edge bolts on for service when the working surface wears.
Features
- Standard one-cylinder hydraulic angle.
- Angles up to 30 degrees left or right.
- Four degrees of side-to-side oscillation.
- 31-inch blade height.
- Trip-edge design.
- Reversible steel bolt-on cutting edge.
- 60-, 72-, 84- and 96-inch nominal widths.
Choosing Your Blade
Check the blade's coverage at full angle when choosing a size. Virnig recommends this V50 series for loaders below 1,800 lb operating capacity; the attachment must also suit your machine's hydraulic system and load limits.
This listing supplies the standard steel-edge configuration. Poly and rubber edges described in the manufacturer documents are separate alternatives, not extra edges included with the blade.
What's Included?
- One V50 Hydraulic Angle Snow Blade in the selected width with steel edge.
- Cylinders, fittings, Eaton hoses and couplers.
Product Resources
Virnig provides manuals by serial number. Use the manual lookup to find the correct instructions for your attachment.