Product overview
Virnig V50 Open Front Rotary Brush Cutter
Description
Take on brush and woody growth with the Virnig V50 Open Front Rotary Brush Cutter. Its open-front deck feeds material toward three double-sided blades, with a rounded flywheel that carries cutting energy through the pass.
The V50 offers Eaton geroler and SAI piston motor configurations for different hydraulic systems, rather than one motor intended to suit every loader. Replaceable shoes, tapered runners and protected drive components support repeated clearing work, while hydraulic braking reduces the wait for the flywheel to stop.
Features
- Three double-sided, machine-sharpened blades provide up to 39 inches of active cutting edge.
- Eaton geroler and SAI piston motor packages expand hydraulic compatibility; pressure limits depend on the selected motor.
- Motor and spindle guards and pressure relief protect service components.
- The rounded flywheel helps distribute cutting energy and glance off obstructions.
- Hydraulic braking is specified to stop the flywheel within 10 seconds.
- Replaceable front shoes, tapered runners and angled rear deck corners support ground-level cutting and material flow.
Choosing Your Attachment
Do not operate without a shatterproof cab on the loader. Select Width and Hydraulic Flow separately, using the machine's actual auxiliary specifications. All models require a case drain. Maximum pressure is 3,500 PSI for the 18-25 GPM motor, 4,100 PSI for the 25-30 and 30-35 GPM motors, or 4,500 PSI for the 35-45 GPM high-pressure motor. Never exceed either the selected flow or pressure limit, even momentarily; reducing engine RPM does not make an oversized hydraulic system compatible. The loader operating capacity must be less than 4,200 pounds, calculated as 50 percent of tipping load rather than a manufacturer's 35-percent rating. The universal quick-attach interface and cutting width must also suit the loader.
Blade Service
Replace cutter blades as a complete matched kit rather than mixing individual replacement blades. Read and follow the operator manual before operation.
What's Included?
- V50 open-front cutter with three blades, couplers, 3/4-inch hoses, case drain and lift-limit chain.
- Pressure gauge is optional and sold separately. No electrical controller is required.
Product Resources
Virnig provides manuals by serial number. Use the manual lookup to find the correct instructions for your attachment.
