Product overview
Virnig V40 Skid Steer Manual Angle Snow Blade
Description
Give your smaller loader a simple way to push snow off drives and work areas with the Virnig V40 Angle Snow Blade. Set the blade to the direction you need and use its angled profile to move snow aside as you travel.
The blade oscillates side to side to follow changing surfaces, and a trip edge helps it respond to an obstruction. A reversible bolt-on steel edge provides a replaceable wear surface for routine winter work.
Features
- Manual angle up to 28 degrees left or right.
- Four degrees of side-to-side oscillation.
- Trip-edge design.
- Reversible 5/8-inch by 8-inch steel bolt-on edge.
- 60-, 72-, 84- and 96-inch nominal widths.
Choosing Your Blade
This listing supplies the manual-angle configuration. Hydraulic-angle systems and alternative edges shown in manufacturer literature are optional equipment, not part of the base blade.
Check blade coverage at full angle, not just its straight width. Virnig positions this V40 series for loaders below 1,500 lb operating capacity; use your machine's actual operating limits when sizing the attachment.
What's Included?
- One V40 Manual Angle Snow Blade in the selected width with the standard steel edge.
Hydraulic angle upgrades and alternative edge kits are not included. The manual-angle base blade does not require hydraulic power.
Product Resources
Virnig provides manuals by serial number. Use the manual lookup to find the correct instructions for your attachment.