Product overview
Virnig V40 Skid Steer Low Profile Dirt Bucket
Description
Keep the cutting edge in view while loading and grading with the Virnig V40 Low Profile Dirt Bucket. Its lower profile helps you see where the edge meets the ground, making it easier to control the cut on smaller skid steers and track loaders.
A welded cutting edge forms the working lip, with gusseting at the back and wear bars underneath to support the shell. The design focuses on everyday dirt work without adding the size of a high-capacity bucket.
Features
- Low profile for cutting-edge visibility from the cab.
- 3/4-inch by 6-inch weld-on edge.
- Additional gusseting on the rear of the bucket.
- Structural wear bars beneath the bucket.
- Nominal 60- through 84-inch width choices.
Choosing Your Bucket
Match the width and material capacity to your loader rather than choosing by volume alone. Virnig recommends this V40 bucket for loaders below 2,000 lb operating capacity.
The base bucket is supplied with its weld-on edge. Optional bolt-on and serrated edges are separate upgrades. Virnig does not offer weld-on teeth or toothbars for this V40 dirt-bucket model.
What's Included?
- One V40 Low Profile Dirt Bucket in the selected width with weld-on edge.
Optional wear edges are not included. Photos may show optional equipment.
Product Resources
Virnig provides manuals by serial number. Use the manual lookup to find the correct instructions for your attachment.